For use with an aluminum primary housing. S&S Superstock™ crankcases, made from 356-T6 aluminum, are much stronger than the OEM case. OEM cases can/may break in high performance or even stock applications, like more than a few of us found out the hard way. These S&S Superstock™ cases can be used for both stock replacement and racing applications. Important to the engine builder are the substantial savings in labor when using S&S cases. These cases come ‘set up’ with sprocket shaft Timken main bearing races and cam needle bearings installed and pinion shaft main bearing race pressed in and line-honed. Additional parts that are supplied include Timken sprocket shaft bearings, cylinder studs, nickel plated case bolts, crankcase fittings, oil pressure sensor, timing & magnetic crankcase drain plugs and a special S&S design alternator stator plug clamp screw. The flywheel scrapers are machined to match the original 8-1/2″ diameter flywheels. S&S cases maximize crankcase oil scavenging efficiency by using a ‘ported’ design breather passageway. S&S cases are clearanced up to and including 5″, no additional clearancing for strokers will be necessary. S&S cases come complete with assembly instructions. Note: The 36-72 S&S oil pump (MCS 519922) can be used with all 36-69 S&S crankcases. Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components, prior to installation. It is of importance that a knowledgeable mechanic will install & make adjustments as required.
S&S, 65-69 crankcase assembly, STD bore. Natural
2,617.78 €
Περιγραφή
Επιπλέον πληροφορίες
Brand | |
---|---|
Τύπος |
66-69 Early Shovelhead; 1965 Panhead with aluminum primary (NU) |
Διαθεσιμότητα |
Παράδοση 4 – 10 εργάσιμες |
Shipping & Delivery
Σχετικά προϊόντα
Dual inlet crankcase breather filter. Chrome
13.52 €
Kuryakyn, cylinder base cover. Chrome
117.02 €
Kuryakyn, Twin Cam peaked rocker box bolt cover 4-pk
48.57 €
Manley, high lift valve spring kit. .500″ to .650″ lift
290.38 €
Manley, valve spring kit. Steel. Std to .600″ lift
240.44 €
Manley, valve spring kit. Steel. Std to .600″ lift
250.07 €
S&S, 92-99 crankcase assembly, STD bore. Black
2,414.58 €
S&S, camshaft ball bearing. Outer, front/rear
23.87 €
JOIN OUR NEWSLETTER
Εγγραφείτε στο newslleter μας για να ενημερώνεστε πρώτοι για νέα προϊόντα και προσφορές.
2023 IronHorses.gr © | All Rights Reserved